Heavy Duty C-Stand - C-Stand Suspension Frame - Heavy Duty - Sensory Suspension Steel Frame

Southpaw's Heavy duty C-Stand is designed to allow for a larger working load. The frame has a padded base that provides a stable, strong support and allows for ample room for swinging. The Heavy Duty C-Stand has a built-in rotational device and height adjustment strap.

Due to the size/weight of this product, please contact us on 0115 718 0020 or sales@southpaw.co.uk before purchasing to discuss shipping options.

Measure your room accurately to be sure the Heavy Duty C-Stand will fit in your designated area. Inspect your shipment immediately upon delivery. 

The Heavy Duty C-Stand comes complete with an Integrated Rotational Device, a daisy chain height adjustment strap which eliminates metal-to-metal contact and wear. Base and Upright padding. Swing not included.

Setup time is approximately 3 hours for 2 capable and experienced people. The kit includes everything you need to start using your therapeutic equipment. Just unpack and assemble. The Heavy Duty C-Stand when assembled will give a usable suspension height of 2.25m, please check the height of the swing to be used to ensure compatibility.

Please refer to the Product Instructions below for additional information regarding installation and special requirements. The Minimum space required is 2.45m (8 Feet)

Ideally, the Heavy Duty C-Stand requires a clearance of 60cm to the rear of the structure, and 1m of clearance on the sides and to the front.

Weight: 325kg Dimensions: 155 W x 220 D x 235cm H
Working Load: 300kg (455kg Passive load)

Please Note:

Be sure not to over-tighten or under-tighten the Integrated Rotational Device. When over-tightened the device will limit rotation and will cause damage to your swing and invalidate any warranty. When Under-tightened it will increase wear on the device and may increase the wear and increase any chances of failure.

If in doubt, please contact us before using the swing or alternatively arrange for our engineers to install at your location. The eyebolt is meant to rotate without making noticeable noise. If you are hearing noises like grinding, clicking, or squeaking, it usually means the part is damaged, losing its grease, or dirty.

The Heavy Duty C-Stand is made to order and is non-returnable.